Testseek.at haben 43 Experten-Bewertungen der NZXT Sentry LX und die durchschnittliche Bewertung beträgt 86% erhoben. Blättern Sie nach unten und sehen Sie alle Beiträge zu NZXT Sentry LX.
September 2008
(86%)
43 Tests
Durchschnittliche Punktzahl von Experten, die dieses Produkt bewertet haben.
Fan control in 100RPM increments, Attractively styled, Easy to read display, Effective fan control, Easy to operate
High price to pay for fan control, Connectors are hot melt glued in place, and some worked themselves loose, Limited viewing angle from above or below, Reset button is too easy to press by accident, Audible alarm is fairly quiet and stops after a few seconds
The NZXT Sentry LX fan controller is a capable device that makes controlling and monitoring up to five fans and temperatures rather convenient. The display is well laid out and easy to read (from the right angles), and taking control of each fan is qu...
Zusammenfassung: As our machines have become more high-powered (and, in many cases, more high-strung), it becomes of increasing importance to monitor the machines’ health. The vast majority of the time, high temperatures are the big concern, especially if you’re pushi...
Easy to install, Easy to use, Looks great, Very well made, Auto and manual modes, Nice long wires
None to be had
If you’re in the market for a fan controller then the NZXT Sentry LX is what you want in your system, it’s easy to use and install, it has nice long cables, it’s well made and it look great. The Sentry LX is easily one of the nicest fan...
Very well-priced, Simple to use, Straightforward installation, High-quality build,
Limited to 4W per fan channel, Awkward viewing angles.
The installation was pretty simple enough. You have to have 2 free 5 ¼ drive bays and some simple patience to run a bunch of wires. The included tape will allow you to attach a thermal probe near every fan that you are running with the controller. Pop...
Large, bright display, Intuitive interface, Auto / Manual modes, Programmable Temperature Alarms, Classic, professional styling,
Limited vertical field of view
The Sentry LX High Performance Fan Controller was a really fun product to review. It fit comfortably in the top two bays of my NZXT Khaos case, and was easy to install. I liked the fact that the unit supports five fans and five temperature sensors, (ma...
High quality components, Looks swank, Simple installation, Intuitive controls,
Occupies two bays, Poor LCD viewing angle, Requires significant additional cable management, Ships with poor thermistor adhesive
NZXT Sentry LX Review Posted by CB Droege Monday, Jan 26th, 2009 at 3:11 pm in Reviews Operation Kicking it on was a pleasant surprise. The LCD is more colorful and attractive than the photos can really show; when viewed directly, it is clean, stark an...
Great build quality, Bright display, Individual control of five fans, Auto or Manual setting for fans, Five thermal diodes attached, Two replacement diodes included, Battery included, to store settings when PC is off, Ability to completely turn off indivi...
Pricey, Reset button too easy to press, Takes up two 5.25 inch bays, Only available in black, Moving parts of the display may be distracting, No PC interface via USB for example
The NZXT Sentry LX may not be cheap. At almost 60 € or 70 US Dollars, it costs as much as some computer cases out there. This means you can expect a lot from the unit as there are plenty of other, similar devices out there, at cheaper price points. T...
Pure eyecandy, Large LCD screen displays five fan speeds and temperatures, Automatic fan speed control based on temperature (with Manual override), Five sensors for monitoring temperature and controlling fans, Programmable temperature alarm for each
4 watts per channel (0.33A) maximum capacity, Doesn’t support PWM fans, Comes with only 3pin fan connectors (no 4pin adapters included)
The NZXT Sentry LX is a great looking fan controller that allows setting and monitoring the speed of multiple fans and monitoring up to five channels of temperature along with displaying the time and date. The unit is easy to install and setup and t...
Independently reports temperature and power consumption, Easy to use and looks sweet, Able to detect if a fan is not working or plugged in, Comes with a PWM 4pin connector
viewing angleCVS bracket could get mistaken for a USB port
The ZM-MFC2 is a step up from standard fan controls with knobs for each fan and is surely better looking. It provides a very bright display to show off to friends, all while giving you some very useful information. We didnt have a Kill-A-Watt handy ...
Zusammenfassung: Bursting onto the casing scene a bit back, NZXT has been one of those companies that has continually expanded and re-invents its product line, expanding quickly beyond just chassis`. Beyond this, NZXT has chosen to craft its own custom variants ...
